| High Efficiency washers and dryers, including front load, top load, combo and stackables rotate at an average speed of 1200 RPM's and above, which is twice the speed of conventional top load washing machines. This can cause vibration in the home and our custom neoprene blend that was developed by the Kellett Company prevents the transference of vibration to the floor by converting the mechanical energy of the vibration to heat energy and dispersing it evenly through the pad.
We have sold our product for use under the following name brand front load washers and dryers: Whirlpool, Kenmore, Frigidaire, GE, Bosch, LG, Maytag, and many more.. Working with our customers, we know that where the washer is located and the type of floor surface can make a difference. So, before you call the store and ask them to pick up that noisy washer, try our KE Shake AwayTM PLUS pads....With the KE Shake AwayTM PLUS Pads under your front load washer and dryer you can expect years of trouble-free service. |
|
 The Pads Really Work |
| Review Date: June 14, 2009 |
| Reviewer: AMD, Carmel, NY USA |
The pads really work!! We have a stacked front-load washer and dryer on the second floor of our house. When the washer went into the spin cycle, the house used to shake (it felt like an earth tremor).
The pads didn't completely eliminate the shaking, but they SIGNIFICANTLY reduced it.
Read the instructions before installing them. There is a top and bottom to the pads. We discovered it after installing, so we had to re-install them.
It's a great product. It is simple, but it works!! We highly recommend it. |
Definitely lessened the shakes
|
| Review Date: February 18, 2009 |
| Reviewer: HoofDr, Nebraska |
After trying nearly everything to stop our front loader washer from walking, I ran across reference to these. The product worked fine, but we still need to do a little adjusting on the balancing of the machine.
It was easy to see they made a tremendous difference, even with everything not as it should be. |
They work, but you have to balance your machine too
|
| Review Date: December 28, 2009 |
| Reviewer: Deke, |
| These pads do help a lot, but they can't do all the work. I have learned that your washing machine has to be balanced and you can't do this with just a level on top of the machine. Level out the machine as best as you can then run the machine in spin mode and feel each foot. If one is vibrating more than the others, adjust it (usually down), then repeat and repeat. It is real trial and error exercise with a lot of time, laying on the floor, cursing, forgetting which foot you moved last..., but it absolutely pays off. I did this and use these pads and it really helped. |
Very good product
|
| Review Date: May 1, 2009 |
| Reviewer: M. Brown, Mission, Texas |
| Bought these to use with a Splendide Combo in a motorhome. They definitely reduced the shake and vibration but, due to the space limitations in a motorhome, where a bit difficult to install. |
Good but lacking something...
|
| Review Date: December 17, 2009 |
| Reviewer: Otis, North Carolina |
| I have had these pads in place for over 1 yer. These vibration pads do an EXCELLENT job of eliminating the transfer of vibrations from the washing machine to the floor but the machine can still vibrate off the pads. The pad's design absorbs most of the vibrations resulting in much quieter washing machine operation. After a while, the machine will vibrate itself off of the pads and you are back where you started - or worse since the machine will be lopsided on only 2 or 3 pads. Depending on how your washer is arranged, installing these pads on the rear corners can be VERY difficult. I wish they were designed with an indentation for the washer feet to sit in so that I never had to mess with them again. As it is, I am looking for a replacement that will stay under the washer feet AND absorb the vibrations. |
|
No video reviews found for this product.
Custom Search